|
||
 |
||
 |
      |
|
Archer Hunter Archery ProductsArchery Bow Press
Limb Grippers Item#: GR-66
Big Squeeze Bow press limb grippers (only) 4 per set. Great Add-on if you already have our Limb Forks!
A new attachment for the "Big Squeeze" bow press to safely compress and totally breakdown the new beyond parallel limb bows introduced by PSE, BowTech and others in 2008. Limb Grippers simply clip onto the "Delrin Pads" of our adjustable limb forks, and can be adjusted with the pads to accommodate wide or thin limb bows.
Dipped in tough, flexible PVC, Limb Grippers squeeze the bow limbs together at the axel (out of the power band), securely holding the ends of the limbs during compression, and preventing the bow from jumping out of the press when relaxing for total breakdown.
With Limb Grippers installed on the limb fork pads you will be able to squeeze (compress) and totally breakdown the most radical beyond parallel limb bows and many parallel or conventional limb bows.
NEW! - Big Squeeze Bow Press / Adj. Limb Forks & Grippers Item#: PLG-64
Big Squeeze adjusts quickly to work with all compound bows, including short, parallel limb bows, beyond parallel limb and many crossbows.
Power arms actually squeeze the limbs of the bow as it is drawn by a no-slip brake winch. The automatic brake ensures safe operation and will not allow an accidental release of the bow. The power arm opposite the winch is adjustable (slides) on the main frame, and the Limb forks have 7.5 inches of cantilever travel from open to close, making it easy to compress even the most parallel of limbs with an axle length of 16 to 43 inches.
The Big Squeeze is very fast and easy to operate. Big Squeeze comes with removable feet on the main frame making it portable and easy to transport.
Weighs 61 lbs.
NEW! - Big Squeeze adjusts quickly to work with all compound bows, including short, parallel limb bows beyond parallel limb bows and many crossbows. Limb forks actually squeeze the limbs of the bow as it is drawn by a no-slip brake winch. The automatic brake ensures safe operation and will not allow an accidental release of the bow. The power arm opposite the winch is adjustable (slides) on the main frame, and the power arms have 7.5 inches of cantilever travel from open to close, making it easy to compress even the most parallel of limb bows or crossbows from 16" to 43" and draw weights of more than 200 lbs.
With LIMB GRIPPERS installed on the Limb fork pads, you will be able to squeeze (compress) and totally breakdown the most radical beyond parallel limb bows and many parallel limb bows (you may have to remove draw stops from the cams on some bows). Pull straps and chains are not required with LIMB GRIPPERS. The Big Squeeze is very fast and easy to operate. Big Squeeze comes with removable feet on the main frame making it portable and easy to transport. Weighs 61 lbs.
NEW! - Big Squeeze Limb Fork Attachment Bracket with Limb Grippers Item#: LFG-65
Adjustable Limb Forks with NEW Limb Grippers ( Sold as an upgrade
for those of you who have an older Big Squeeze bow press with the yellow rollers)
Simply remove the original yellow high density rollers on each power arm and replace with the limb forks. Limb Fork Attachment Bracket can be used on any bow (including parallel limb) or crossbows. Center the wheel/cam between the fork pads and within 1" to 1 1/2" of the axels on each end of the bow with equal portions of the limb resting on all pads - turn the crank on the brake winch and the bow will easily squeeze together. Squeezing the bow higher on the limb makes compression much easier because of the increased leverage gained with the limb forks.
The adjustable Limb Forks and Power Arms quickly adjust to accomodate THIN or WIDE limb bows and Cross Bows with an axel lenght of 16" to 43". Adjustable Limb Forks come with our New Limb Grippers. A new attachment for the "Big Squeeze" bow press to safely compress and totally breakdown the new beyond parallel limb bows introduced by PSE, BowTech and others in 2008. Limb Grippers simply clip onto the "Delrin Pads" of our adjustable limb forks, and can be adjusted with the pads to accommodate wide or thin limb bows.
Dipped in tough, flexible PVC, Limb Grippers squeeze the bow limbs together at the axel (out of the power band), securely holding the ends of the limbs during compression, and preventing the bow from jumping out of the press when relaxing for total breakdown.
With Limb Grippers installed on the limb fork pads you will be able to squeeze (compress) and totally breakdown the most radical beyond parallel limb bows and many parallel or conventional limb bows.
Workbench - Press Stand Item#: WB-58
A convenient table stand that will support Big Squeeze and hold all your parts and tools for adjustments or repairs.
Weighs 26 lbs.
A convenient table stand that will support Big Squeeze and hold all your parts and tools for adjustments or repairs. Weighs 26 lbs. Big Squeeze Bow Press
Limb Grippers Item#: GR-66
Big Squeeze Bow press limb grippers (only) 4 per set. Great Add-on if you already have our Limb Forks!
A new attachment for the "Big Squeeze" bow press to safely compress and totally breakdown the new beyond parallel limb bows introduced by PSE, BowTech and others in 2008. Limb Grippers simply clip onto the "Delrin Pads" of our adjustable limb forks, and can be adjusted with the pads to accommodate wide or thin limb bows.
Dipped in tough, flexible PVC, Limb Grippers squeeze the bow limbs together at the axel (out of the power band), securely holding the ends of the limbs during compression, and preventing the bow from jumping out of the press when relaxing for total breakdown.
With Limb Grippers installed on the limb fork pads you will be able to squeeze (compress) and totally breakdown the most radical beyond parallel limb bows and many parallel or conventional limb bows.
NEW! - Big Squeeze Bow Press / Adj. Limb Forks & Grippers Item#: PLG-64
Big Squeeze adjusts quickly to work with all compound bows, including short, parallel limb bows, beyond parallel limb and many crossbows.
Power arms actually squeeze the limbs of the bow as it is drawn by a no-slip brake winch. The automatic brake ensures safe operation and will not allow an accidental release of the bow. The power arm opposite the winch is adjustable (slides) on the main frame, and the Limb forks have 7.5 inches of cantilever travel from open to close, making it easy to compress even the most parallel of limbs with an axle length of 16 to 43 inches.
The Big Squeeze is very fast and easy to operate. Big Squeeze comes with removable feet on the main frame making it portable and easy to transport.
Weighs 61 lbs.
NEW! - Big Squeeze adjusts quickly to work with all compound bows, including short, parallel limb bows beyond parallel limb bows and many crossbows. Limb forks actually squeeze the limbs of the bow as it is drawn by a no-slip brake winch. The automatic brake ensures safe operation and will not allow an accidental release of the bow. The power arm opposite the winch is adjustable (slides) on the main frame, and the power arms have 7.5 inches of cantilever travel from open to close, making it easy to compress even the most parallel of limb bows or crossbows from 16" to 43" and draw weights of more than 200 lbs.
With LIMB GRIPPERS installed on the Limb fork pads, you will be able to squeeze (compress) and totally breakdown the most radical beyond parallel limb bows and many parallel limb bows (you may have to remove draw stops from the cams on some bows). Pull straps and chains are not required with LIMB GRIPPERS. The Big Squeeze is very fast and easy to operate. Big Squeeze comes with removable feet on the main frame making it portable and easy to transport. Weighs 61 lbs.
Archery Bow Displays
2 Bow Slat Wall Bracket Item#: SWD-61
Chrome Plated 2 Bow slatwall bracket.
For use with slatwall siding.
A practical and handsome chrome plated 2 bow display for use in stores with slatwall siding. Create your own displays. Holds any style bow. This bracket can be purchased in packs of five as well.
2 Bow Slat Wall Bracket (5 pack) Item#: SWD-615
Chrome Plated 2 Bow Archery Bow Display rack to be used with slatwall siding.
A practical and handsome chrome plated 2 bow display for use in stores with slatwall siding. Create your own displays. Holds any style bow. This bracket can be purchased individually as well.
Adjustable Rotating 12 Bow Display Item#: ARD-63
A Handsome sales tool.
Rotating 12 bow archery dealer display.
Each arm holds 3 bows, and adjust to accommodate any limb style Manually rotates.
Rotating floor display holds 12 bows firmly by their upper limb and is adjustable. Each arm holds 3 bows and can be adjusted to accommodate the limb style of any bow ( recurve, conventional and parallel limbs.) Adjustable 12 bow rotating display stands 57 inches tall, is 36 inches in diameter and manually rotates to show all the bows in the display. Lightweight, welded steel tubing with black powder coat paint and wide stable base make this display strong and durable. Bow grips are vinyl coated for bow protection. Comes with a 11" X 7" sign holder.
Bowhunters Adjustable 4 Bow Display Item#: AHD-65
Great for your home or workshop. ADJUSTABLE!
Display or store your bows and equipment on the cabin wall after returning from the hunt. Bowhunters display will hold up to 4 bows fully outfitted for the hunt and is adjustable to accommodate any 4 bows with similiar limb styles (conventional, recureve, parallel and beyond parallel limb bows). 24" wide and powder coated for a classy, durable finish.
Weight 7 lbs.
Dealers ECONOMY Adjustable Bow Display Item#: DBD-21
This economy display is great for floor and countertop promotions, Lightweight and portable. Rectangular tubing top is drilled to accomodate up to 12 bows.
12 "L" shaped bolts, buts and nylon washers included.
(Extra bolts, nuts and nylon washers available)
Weighs 12 lbs.
Lightweight and portable. Rectangular tubing top is drilled to accomodate up to 12 bows. This economy display is great for floor and countertop promotions, adjusts from 22" to 36" tall and is black powder coated for durability. 12 "L" shaped bolts, buts and nylon washers included. (Extra bolts, nuts and nylon washers available - Item #XDBN pack 6). Weighs 12 lbs.
Deluxe "Adjustable" 10 Bow Gondola Display Item#: AGD-64
Utilize your gondola space more efficiently with custom bow displays.
Save space by mounting bow displays on top of your store gondola fixture. Same great features as our ABD-59 and AFD-62, this display comes with extra long brackets especially designed to be mounted on a single 4 ft. gondola fixture with a height of 4 feet or taller.
The lower portion of the gondola can be used to promote related merchandise, or when attached at the proper height a ABD-59 display can be secured below it to display an additional 10 or 20 bows on a 4ft gondola.
Weight 19 lbs.
Deluxe 20 Bow 8 Foot Gondola Display Item#: DDGD-54
Holds 20 bows on top 8 feet of gondola space.
Comes with (2) 4-foot bow displays and a single center post. Mounts in the same manner as the single 4-foot display. Again the lower portion of the gondola can be used to display other merchandise.
Weighs 32 lbs.
Holds 20 bows on top 8 feet of gondola space. Comes with (2) 4-foot bow displays and a single center post. Mounts in the same manner as the single 4-foot display. Again the lower portion of the gondola can be used to display other merchandise. Weighs 32 lbs.
Deluxe Adjustable 10 Bow Floor Display Item#: AFD-62
Great floor display to promote bows in store at shoots, shows and events.
Adjustable to accomodate any 10 bows. 4 feet tall.
This display grips the bow by its upper limb and is adjustable to accommodate any 10 bows with the same limb style (recurve, conventional and parallel limbs). 48" long and 4 feet tall and black powder coated for beauty and durability. Bow holders are vinyl covered for bow protection
Deluxe Adjustable 10 Bow Wall/Ceiling Display Item#: ABD-59
Ideal for shops with limited floor space. attaches to the wall or ceiling holds 10 bows and adjusts to accommodate any limb style.
Attached to the wall or ceiling, this display is adjustable to accomodate any 10 bows with the same limb style (recurve, conventional and parallel limbs) and is 48" long. mounting brackets are included that can be attached to 16" or 24" wall studs or ceiling joists. The bow holders are vinyl coated for bow protection and black powder coat paint for durability.
Deluxe Dealer Bow Display Extra Bolts etc... Item#: XDBN-217
Extra bolts, nuts and nylon washers for Displays.
Extra bolts, nuts and nylon washers for Displays.
Wood Top 16 Bow Display Item#: RWD-128
Great for Trade Shows and dealer floor displays.
Practical and stable, Wood Top 16 is routered with steel inserts for strength and holds 16 bows securely.
Standing 31" tall and 35" long with powder coated steel tube legs and feet.
16 "l" shaped bolts, nuts and nylon washers included.
Weighs 15 lbs.
Extra bolts, nuts and nylon washers available - Item #XDBN-217 pack 6
Great for Trade Shows and dealer floor displays. Practical and stable, Wood Top 16 is routered with steel inserts for strength and holds 16 bows securely. Standing 31" tall and 35" long with powder coated steel tube legs and feet. 16 "l" shaped bolts, nuts and nylon washers included. Weighs 15 lbs. Extra bolts, nuts and nylon washers available - Item #XDBN-217 pack 6 Bow Press Workbench
Workbench - Press Stand Item#: WB-58
A convenient table stand that will support Big Squeeze and hold all your parts and tools for adjustments or repairs.
Weighs 26 lbs.
A convenient table stand that will support Big Squeeze and hold all your parts and tools for adjustments or repairs. Weighs 26 lbs. Archery Range & Outdoor Products
Bow Sling Item#: BS-12
Functional and affordable carrying sling allows both hands to be free.
Slide buckle adjusts to fit any style bow.
Soft 2" webbing is lightweight and comfortable.
Easy on- Easy off.
Functional and affordable carrying sling allows both hands to be free. Slide buckle adjusts to fit any style bow. Soft 2" webbing is lightweight and comfortable. Easy on- Easy off.
Dandy-One Item#: DOB-1
No more leaving your bow or arrows on the ground.
Arrow stand with bow rest. Holds more than a dozen arrows.
Spike base with foot ledge for installation, 8" ground spike.
Cyclinder is black finished steel for durability and has foam bottom, rubber rim and vinyl covered bow rest for bow and arrow protection.
Weighs 5 lbs.
No more leaving your bow or arrows on the ground. Arrow stand with bow rest. Holds more than a dozen arrows. Spike base with foot ledge for installation, 8" ground spike. Cyclinder is black finished steel for durability and has foam bottom, rubber rim and vinyl covered bow rest for bow and arrow protection. Weighs 5 lbs.
Flat Base Item#: HS13
For Handy Stands. Interchangeable with spike base.
HS13 Flat Base weighs 3 lbs.
For Handy Stands. Interchangeable with spike base. HS13 Flat Base weighs 3 lbs.
Ground Spike Bow Rest Item#: GSPK-28
Ideal for the back yard archer and ground blind hunter.
Holds all types of bows and works great in most types of soil including soft sand. Insert into the ground - straight up or at an angle that will accommodate the shape or curve of the bow's limb.
Vinyl covered bow rest and black powder coat finish.
Weighs only 16 oz.
Ideal for the back yard archer and ground blind hunter. Holds all types of bows and works great in most types of soil including soft sand. Insert into the ground - straight up or at an angle that will accommodate the shape or curve of the bow's limb. Vinyl covered bow rest and black powder coat finish. Weighs only 16 oz.
Handy Stand- Deluxe Bow and Arrow Stand Item#: HS02
A convenient and practical way to hold your bow and arrows. Two can practice at once.
Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection.
Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment.
Purchase with interchangeable flat base, spike base, or both.
Weighs 15 lbs. w/ Flat Base
A convenient and practical way to hold your bow and arrows. Two can practice at once. Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection. Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment. Purchase with interchangeable flat base, spike base, or both. Weighs 15 lbs. w/ Flat Base
Handy Stand- Deluxe Bow and Arrow Stand with Spike Base only Item#: HS01
A convenient and practical way to hold your bow and arrows. Two can practice at once.
Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection.
Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment.
Purchase with interchangeable flat base, spike base, or both.
Weighs 13 lbs. w/ Spike Base
A convenient and practical way to hold your bow and arrows. Two can practice at once. Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection. Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment. Purchase with interchangeable flat base, spike base, or both.
Weighs 13 lbs. w/ Spike Base
Skinning Gambrel Item#: SG-15
Holds whole animal or 1/2 at a time without dropping.
Heavy duty welded steel will hold a weight of 600 lbs. Spreads hind legs of game 20".
Holds whole animal or 1/2 at a time without dropping. Heavy duty welded steel will hold a weight of 600 lbs. Spreads hind legs of game 20".
Spike Base Item#: HS11
For Handy Stands. Interchangeable with flat base.
HS11 Spike Base weighs only 1 lb.
For Handy Stands. Interchangeable with flat base. HS11 Spike Base weighs only 1 lb.
Tree Stand Bow Rest with NO DRILL Attachment Bracket Item#: TSBR-1
Simple two-prong bow rest can be bolted in a convenient easy to reach position on almost any stand. Works very well on the hand rail of a ladder stand, keeping the bow within easy reach at all times.
Bow's weight holds it in place. Supports most types of bows. Parallel limb bows can be held by sliding one of the bow rest prongs through a hole in the bow riser and allowing the bow to tip forward or back to lock it into the rest.
Simple two-prong bow rest can be bolted in a convenient easy to reach position on almost any stand. Works very well on the hand rail of a ladder stand, keeping the bow within easy reach at all times. Bow's weight holds it in place. Supports most types of bows. Parallel limb bows can be held by sliding one of the bow rest prongs through a hole in the bow riser and allowing the bow to tip forward or back to lock it into the rest. Bow Stands
Dandy-One Item#: DOB-1
No more leaving your bow or arrows on the ground.
Arrow stand with bow rest. Holds more than a dozen arrows.
Spike base with foot ledge for installation, 8" ground spike.
Cyclinder is black finished steel for durability and has foam bottom, rubber rim and vinyl covered bow rest for bow and arrow protection.
Weighs 5 lbs.
No more leaving your bow or arrows on the ground. Arrow stand with bow rest. Holds more than a dozen arrows. Spike base with foot ledge for installation, 8" ground spike. Cyclinder is black finished steel for durability and has foam bottom, rubber rim and vinyl covered bow rest for bow and arrow protection. Weighs 5 lbs.
Handy Stand- Deluxe Bow and Arrow Stand Item#: HS02
A convenient and practical way to hold your bow and arrows. Two can practice at once.
Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection.
Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment.
Purchase with interchangeable flat base, spike base, or both.
Weighs 15 lbs. w/ Flat Base
A convenient and practical way to hold your bow and arrows. Two can practice at once. Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection. Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment. Purchase with interchangeable flat base, spike base, or both. Weighs 15 lbs. w/ Flat Base
Handy Stand- Deluxe Bow and Arrow Stand with Spike Base only Item#: HS01
A convenient and practical way to hold your bow and arrows. Two can practice at once.
Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection.
Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment.
Purchase with interchangeable flat base, spike base, or both.
Weighs 13 lbs. w/ Spike Base
A convenient and practical way to hold your bow and arrows. Two can practice at once. Each cylinder holds more than a dozen arrows. Cylinders have foam bottoms and rubber rims for arrow protection. Classy wood convenience table, vinyl covered bow rests and durable black finish steel cyclinders for many years of enjoyment. Purchase with interchangeable flat base, spike base, or both.
Weighs 13 lbs. w/ Spike Base
Tree Stand Bow Rest with NO DRILL Attachment Bracket Item#: TSBR-1
Simple two-prong bow rest can be bolted in a convenient easy to reach position on almost any stand. Works very well on the hand rail of a ladder stand, keeping the bow within easy reach at all times.
Bow's weight holds it in place. Supports most types of bows. Parallel limb bows can be held by sliding one of the bow rest prongs through a hole in the bow riser and allowing the bow to tip forward or back to lock it into the rest.
Simple two-prong bow rest can be bolted in a convenient easy to reach position on almost any stand. Works very well on the hand rail of a ladder stand, keeping the bow within easy reach at all times. Bow's weight holds it in place. Supports most types of bows. Parallel limb bows can be held by sliding one of the bow rest prongs through a hole in the bow riser and allowing the bow to tip forward or back to lock it into the rest. Archery Shop Equipment
Adjustable Indoor Chronograph/Camera Stand Item#: CCS-43
Great for the indoor shooting range or any hard flat surface. Height adjusts from 32" to 60" tall.
Lightweight and stable, a 1/4" thumbscrew secures the chronograph or camera firmly to the stand. Black powder coated steel tubing is durable and handsome.
Weighs 8 lbs.
Great for the indoor shooting range or any hard flat surface. Height adjusts from 32" to 60" tall. Lightweight and stable, a 1/4" thumbscrew secures the chronograph or camera firmly to the stand. Black powder coated steel tubing is durable and handsome. Weighs 8 lbs.
Adjustable Outdoor Chronograph/Camera Stand Item#: CCG-44
Ideal for in the field shooters or camera buffs. 8" spikes work well in most types of uneven ground.
Height adjusts from 32" to 60" tall.
Handy foot ledge for quick and easy installation and a 1/4" thumbscrew secures the chronograph or camera firmly.
Weighs 6 lbs.
Ideal for in the field shooters or camera buffs. 8" spikes work well in most types of uneven ground. Height adjusts from 32" to 60" tall. Handy foot ledge for quick and easy installation and a 1/4" thumbscrew secures the chronograph or camera firmly. Weighs 6 lbs.
C.W.s Chronograph Attachment Bracket Item#: CB-42
Attaches to our paper tuning rack or any rigid square tubing frame up to 1 1/2" for a secure mounting of your chronograph.
Black powder coated steel tubing.
Attaches to our paper tuning rack or any rigid square tubing frame up to 1 1/2" for a secure mounting of your chronograph. Black powder coated steel tubing.
Paper Tuning Rack Item#: PTR-11
Fine-tune your bow.
Check arrow flight-Locate proper nocking point and tension of cushion plunger, determine stiff or weak arrow spine.
20" x 18" shooting face uses 18" freezer paper purchased at any grocery store and spring tension holds paper tight.
Complete instructions and one roll of freezer paper included.
Weighs 17 lbs.
Fine-tune your bow. Check arrow flight-Locate proper nocking point and tension of cushion plunger, determine stiff or weak arrow spine. 20" x 18" shooting face uses 18" freezer paper purchased at any grocery store and spring tension holds paper tight. Complete instructions and one roll of freezer paper included. Weighs 17 lbs.
Workbench Fully Adjustable Bow Vise Item#: BV-39
A must for any pro shop and a great addition to the avid arher's home workbench.
Accessory installation, adjustments or repairs are made quickly and easily on bows and crossbows. Easy to operate, this bow vise grasps the limb of any style bow securely and rotates the bow 360 degrees.
Heavy-duty powder coated welded steel makes this vise a durable-quality tool that will last a lifetime. Holding prongs are vinyl-coated with felt backing for bow protection.
Weighs 2 3/4 lbs.
A must for any pro shop and a great addition to the avid arher's home workbench. Accessory installation, adjustments or repairs are made quickly and easily on bows and crossbows. Easy to operate, this bow vise grasps the limb of any style bow securely and rotates the bow 360 degrees. Heavy-duty powder coated welded steel makes this vise a durable-quality tool that will last a lifetime. Holding prongs are vinyl-coated with felt backing for bow protection. Weighs 2 3/4 lbs. Bow Displays
2 Bow Slat Wall Bracket Item#: SWD-61
Chrome Plated 2 Bow slatwall bracket.
For use with slatwall siding.
A practical and handsome chrome plated 2 bow display for use in stores with slatwall siding. Create your own displays. Holds any style bow. This bracket can be purchased in packs of five as well.
2 Bow Slat Wall Bracket (5 pack) Item#: SWD-615
Chrome Plated 2 Bow Archery Bow Display rack to be used with slatwall siding.
A practical and handsome chrome plated 2 bow display for use in stores with slatwall siding. Create your own displays. Holds any style bow. This bracket can be purchased individually as well.
Adjustable Rotating 12 Bow Display Item#: ARD-63
A Handsome sales tool.
Rotating 12 bow archery dealer display.
Each arm holds 3 bows, and adjust to accommodate any limb style Manually rotates.
Rotating floor display holds 12 bows firmly by their upper limb and is adjustable. Each arm holds 3 bows and can be adjusted to accommodate the limb style of any bow ( recurve, conventional and parallel limbs.) Adjustable 12 bow rotating display stands 57 inches tall, is 36 inches in diameter and manually rotates to show all the bows in the display. Lightweight, welded steel tubing with black powder coat paint and wide stable base make this display strong and durable. Bow grips are vinyl coated for bow protection. Comes with a 11" X 7" sign holder.
Bowhunters Adjustable 4 Bow Display Item#: AHD-65
Great for your home or workshop. ADJUSTABLE!
Display or store your bows and equipment on the cabin wall after returning from the hunt. Bowhunters display will hold up to 4 bows fully outfitted for the hunt and is adjustable to accommodate any 4 bows with similiar limb styles (conventional, recureve, parallel and beyond parallel limb bows). 24" wide and powder coated for a classy, durable finish.
Weight 7 lbs.
Dealers ECONOMY Adjustable Bow Display Item#: DBD-21
This economy display is great for floor and countertop promotions, Lightweight and portable. Rectangular tubing top is drilled to accomodate up to 12 bows.
12 "L" shaped bolts, buts and nylon washers included.
(Extra bolts, nuts and nylon washers available)
Weighs 12 lbs.
Lightweight and portable. Rectangular tubing top is drilled to accomodate up to 12 bows. This economy display is great for floor and countertop promotions, adjusts from 22" to 36" tall and is black powder coated for durability. 12 "L" shaped bolts, buts and nylon washers included. (Extra bolts, nuts and nylon washers available - Item #XDBN pack 6). Weighs 12 lbs.
Deluxe "Adjustable" 10 Bow Gondola Display Item#: AGD-64
Utilize your gondola space more efficiently with custom bow displays.
Save space by mounting bow displays on top of your store gondola fixture. Same great features as our ABD-59 and AFD-62, this display comes with extra long brackets especially designed to be mounted on a single 4 ft. gondola fixture with a height of 4 feet or taller.
The lower portion of the gondola can be used to promote related merchandise, or when attached at the proper height a ABD-59 display can be secured below it to display an additional 10 or 20 bows on a 4ft gondola.
Weight 19 lbs.
Deluxe 20 Bow 8 Foot Gondola Display Item#: DDGD-54
Holds 20 bows on top 8 feet of gondola space.
Comes with (2) 4-foot bow displays and a single center post. Mounts in the same manner as the single 4-foot display. Again the lower portion of the gondola can be used to display other merchandise.
Weighs 32 lbs.
Holds 20 bows on top 8 feet of gondola space. Comes with (2) 4-foot bow displays and a single center post. Mounts in the same manner as the single 4-foot display. Again the lower portion of the gondola can be used to display other merchandise. Weighs 32 lbs.
Deluxe Adjustable 10 Bow Floor Display Item#: AFD-62
Great floor display to promote bows in store at shoots, shows and events.
Adjustable to accomodate any 10 bows. 4 feet tall.
This display grips the bow by its upper limb and is adjustable to accommodate any 10 bows with the same limb style (recurve, conventional and parallel limbs). 48" long and 4 feet tall and black powder coated for beauty and durability. Bow holders are vinyl covered for bow protection
Deluxe Adjustable 10 Bow Wall/Ceiling Display Item#: ABD-59
Ideal for shops with limited floor space. attaches to the wall or ceiling holds 10 bows and adjusts to accommodate any limb style.
Attached to the wall or ceiling, this display is adjustable to accomodate any 10 bows with the same limb style (recurve, conventional and parallel limbs) and is 48" long. mounting brackets are included that can be attached to 16" or 24" wall studs or ceiling joists. The bow holders are vinyl coated for bow protection and black powder coat paint for durability.
Deluxe Dealer Bow Display Extra Bolts etc... Item#: XDBN-217
Extra bolts, nuts and nylon washers for Displays.
Extra bolts, nuts and nylon washers for Displays.
Wood Top 16 Bow Display Item#: RWD-128
Great for Trade Shows and dealer floor displays.
Practical and stable, Wood Top 16 is routered with steel inserts for strength and holds 16 bows securely.
Standing 31" tall and 35" long with powder coated steel tube legs and feet.
16 "l" shaped bolts, nuts and nylon washers included.
Weighs 15 lbs.
Extra bolts, nuts and nylon washers available - Item #XDBN-217 pack 6
Great for Trade Shows and dealer floor displays. Practical and stable, Wood Top 16 is routered with steel inserts for strength and holds 16 bows securely. Standing 31" tall and 35" long with powder coated steel tube legs and feet. 16 "l" shaped bolts, nuts and nylon washers included. Weighs 15 lbs. Extra bolts, nuts and nylon washers available - Item #XDBN-217 pack 6 Bow Rests
Bow Sling Item#: BS-12
Functional and affordable carrying sling allows both hands to be free.
Slide buckle adjusts to fit any style bow.
Soft 2" webbing is lightweight and comfortable.
Easy on- Easy off.
Functional and affordable carrying sling allows both hands to be free. Slide buckle adjusts to fit any style bow. Soft 2" webbing is lightweight and comfortable. Easy on- Easy off.
Ground Spike Bow Rest Item#: GSPK-28
Ideal for the back yard archer and ground blind hunter.
Holds all types of bows and works great in most types of soil including soft sand. Insert into the ground - straight up or at an angle that will accommodate the shape or curve of the bow's limb.
Vinyl covered bow rest and black powder coat finish.
Weighs only 16 oz.
Ideal for the back yard archer and ground blind hunter. Holds all types of bows and works great in most types of soil including soft sand. Insert into the ground - straight up or at an angle that will accommodate the shape or curve of the bow's limb. Vinyl covered bow rest and black powder coat finish. Weighs only 16 oz.
Tree Stand Bow Rest with NO DRILL Attachment Bracket Item#: TSBR-1
Simple two-prong bow rest can be bolted in a convenient easy to reach position on almost any stand. Works very well on the hand rail of a ladder stand, keeping the bow within easy reach at all times.
Bow's weight holds it in place. Supports most types of bows. Parallel limb bows can be held by sliding one of the bow rest prongs through a hole in the bow riser and allowing the bow to tip forward or back to lock it into the rest.
Simple two-prong bow rest can be bolted in a convenient easy to reach position on almost any stand. Works very well on the hand rail of a ladder stand, keeping the bow within easy reach at all times. Bow's weight holds it in place. Supports most types of bows. Parallel limb bows can be held by sliding one of the bow rest prongs through a hole in the bow riser and allowing the bow to tip forward or back to lock it into the rest. Bow Vise
Workbench Fully Adjustable Bow Vise Item#: BV-39
A must for any pro shop and a great addition to the avid arher's home workbench.
Accessory installation, adjustments or repairs are made quickly and easily on bows and crossbows. Easy to operate, this bow vise grasps the limb of any style bow securely and rotates the bow 360 degrees.
Heavy-duty powder coated welded steel makes this vise a durable-quality tool that will last a lifetime. Holding prongs are vinyl-coated with felt backing for bow protection.
Weighs 2 3/4 lbs.
A must for any pro shop and a great addition to the avid arher's home workbench. Accessory installation, adjustments or repairs are made quickly and easily on bows and crossbows. Easy to operate, this bow vise grasps the limb of any style bow securely and rotates the bow 360 degrees. Heavy-duty powder coated welded steel makes this vise a durable-quality tool that will last a lifetime. Holding prongs are vinyl-coated with felt backing for bow protection. Weighs 2 3/4 lbs. Camera Stands
Adjustable Indoor Chronograph/Camera Stand Item#: CCS-43
Great for the indoor shooting range or any hard flat surface. Height adjusts from 32" to 60" tall.
Lightweight and stable, a 1/4" thumbscrew secures the chronograph or camera firmly to the stand. Black powder coated steel tubing is durable and handsome.
Weighs 8 lbs.
Great for the indoor shooting range or any hard flat surface. Height adjusts from 32" to 60" tall. Lightweight and stable, a 1/4" thumbscrew secures the chronograph or camera firmly to the stand. Black powder coated steel tubing is durable and handsome. Weighs 8 lbs.
Adjustable Outdoor Chronograph/Camera Stand Item#: CCG-44
Ideal for in the field shooters or camera buffs. 8" spikes work well in most types of uneven ground.
Height adjusts from 32" to 60" tall.
Handy foot ledge for quick and easy installation and a 1/4" thumbscrew secures the chronograph or camera firmly.
Weighs 6 lbs.
Ideal for in the field shooters or camera buffs. 8" spikes work well in most types of uneven ground. Height adjusts from 32" to 60" tall. Handy foot ledge for quick and easy installation and a 1/4" thumbscrew secures the chronograph or camera firmly. Weighs 6 lbs.
C.W.s Chronograph Attachment Bracket Item#: CB-42
Attaches to our paper tuning rack or any rigid square tubing frame up to 1 1/2" for a secure mounting of your chronograph.
Black powder coated steel tubing.
Attaches to our paper tuning rack or any rigid square tubing frame up to 1 1/2" for a secure mounting of your chronograph. Black powder coated steel tubing. Paper Tuning Racks
Paper Tuning Rack Item#: PTR-11
Fine-tune your bow.
Check arrow flight-Locate proper nocking point and tension of cushion plunger, determine stiff or weak arrow spine.
20" x 18" shooting face uses 18" freezer paper purchased at any grocery store and spring tension holds paper tight.
Complete instructions and one roll of freezer paper included.
Weighs 17 lbs.
Fine-tune your bow. Check arrow flight-Locate proper nocking point and tension of cushion plunger, determine stiff or weak arrow spine. 20" x 18" shooting face uses 18" freezer paper purchased at any grocery store and spring tension holds paper tight. Complete instructions and one roll of freezer paper included. Weighs 17 lbs. Skinning Gambrels
Skinning Gambrel Item#: SG-15
Holds whole animal or 1/2 at a time without dropping.
Heavy duty welded steel will hold a weight of 600 lbs. Spreads hind legs of game 20".
Holds whole animal or 1/2 at a time without dropping. Heavy duty welded steel will hold a weight of 600 lbs. Spreads hind legs of game 20". |
||
 |
||
Archer Hunter • P.O. Box 522 • Buffalo, MN 55313 • Phone: 763-682-3665 Big Squeeze Bow Press • Archery Bow Displays/Misc • Archery Range & Outdoor Products • Archery Dealers Archery Shop Equipment • All Archery Products • Target Archers • Bow Hunters • Archery News • About CW Erickson Home • Site Map • Terms & Conditions • Privacy Policy Website by iMBS&t • Copyright 2009 © Archer Hunter C.W. Erickson Mfg, LLC |
||